Inspection.
Evolved.
All new hardware for anilox, gravure and flexo plate measurement. Built to give every operator the same repeatable result, on the production floor, scan after scan.
Repeatable.
The same reading, whoever runs the scan and wherever they are. A magnetic quick-change lens fixes alignment and automated workflows remove guesswork.
Detailed.
A widescreen 2.3 MP, 1920×1200 sensor resolves fine cell structure and surface wear, so you catch a problem early, while it is still small and cheap to put right.
Fast.
A full reading in seconds lets you measure far more often without slowing production. More checks mean richer history and better decision making.
Engineered to perform.
New sensor. New processing electronics. New optics. New ergonomics. Every part chosen and tuned for real pressroom conditions, so every operator gets the same reliable reading on the production floor, with no separate lab or anti-vibration table needed.
Magnetic quick-change lens. Same alignment and standoff every scan, every device.
2.3MP widescreen sensor. Sees wear early.
Ergonomic and
easy to hold.
Smart LED
feedback system.
One-touch lock holds position.
Refined drive system for repeatable scans.
USB-C. Power and data in one cable.
Same result, every operator, every site.
Inspection only controls quality when the numbers can be trusted. EVO is built so the reading does not change with the person holding it. A magnetic quick-change lens fixes alignment and standoff, a two-touch workflow removes guesswork, and every scan is recorded to the Troika Management System in one standard format. The result is measurable process control: the same method and the same data, across every shift and every location.
See wear before it reaches the press.
A widescreen 2.3 MP, 1920×1200 imaging sensor resolves fine cell structure, wall damage and surface wear that lower-resolution devices miss. Catching change early is where accuracy turns into money saved, because intervention is cheap while the fault is still small. Clearer images also mean more confident scoring, so two operators reach the same judgement from the same roll.
Measure more often, not less.
From surface to data in seconds
When a check takes seconds, you can measure more often.
EVO sequences five rapid scans and turns the surface into measurable data: cell volume, depth, screen count and wall angle, with a rotatable 3D view you can inspect from any angle.
More readings mean a richer history and earlier warning of drift, so your trend data is something you can plan around.
Data Continuity.
Every manufacturer interprets cell data differently. Measure the same roll with different devices and you will get conflicting results.
Troika EVO's Legacy Mode resolves this. Select this option to automatically match the cell cut-off of other measuring systems, and the Troika EVO will adapt the scan data to produce comparable numbers. You keep the speed and precision of the EVO, and your historical data stays usable. This means that any variance you measure is real, not just a different algorithm.
Built for the people who use it.
One platform, many jobs. Whatever your role, EVO turns inspection into a measurable, repeatable process, backed by the full Troika software suite included with every device.
QC from origin.
Inspect, score and certify every roll before it ships. A standardised five-scan sequence gives the same verified result on every unit, and the data lands in TMS as an inspection record you can attach to the shipment. You ship proof of condition, not just a roll.
Print first time.
Catch wear before it turns into a defective run. With ink and substrate costs rising, every avoided reprint is margin kept and every minute saved at make-ready is a minute on press. Trend data in TMS shows which rolls are drifting, so you fix the cause instead of firefighting the symptom.
Cleaning, verified.
Replace a visual sign-off with measurable proof. Scan before and after a clean, and the cleaning report prints the before-and-after comparison to PDF in a couple of clicks, recorded against the roll in TMS. Every cycle is auditable, for every roll and every customer.
Cylinder condition, monitored.
Track each cylinder by the work it has actually done. In TMS, cylinders are logged against jobs and grouped by run, single process or mixed for hybrid printing, so each cylinder's history shows the revolutions and print distance it has accrued across every completed job, with a running total. Plan re-engraving on real usage rather than guesswork, and print the full history to PDF whenever you need it.
Compliance, proven.
Produce audit-ready records for every roll and every shift on demand. Standardised scans and traceable analytics in TMS keep you ahead of food contact, pharmaceutical and packaging requirements without slowing production. The proof is filed before the auditor asks.
Plate integrity.
Measure dot percentage, screen count and plate condition on every flexo plate. Consistent, repeatable readings let you refine ink coverage and prove a plate is right before it goes on press, so you cut waste and print first time.
Complete software. Licensed for life.
Every Troika EVO ships with the full software family: anilox, gravure, flexo plate, surface roughness and the Troika Management System. The software is licensed for life. There is no licence fee and no subscription to use it. Buy once, own it, and keep using all software for the life of the device.
Three generations. One clear leap.
Troika EVO builds on the original AniCAM 7.3 and the AniCAM HD platform: the same proven measurement method, with a new sensor, new electronics and new ergonomics. Here is how the three compare.
Trade up to Troika EVO.
Trade in a working or damaged AniCAM 7.3, HD or HD Plus and move to a brand-new Troika EVO, our most advanced inspection device yet. You keep the method your team already knows and gain the new sensor, the repeatability and the data. Every trade-in includes the full software suite, licensed for life, plus your first year of support, updates and training, and a three-year warranty.1
¹ Three-year warranty applies when AMP Gold is taken in the second year of ownership for servicing.
Ready to see the EVO?
Book a personalised demonstration tailored to your operation.