3D inspection for anilox rolls, gravure cylinders and flexo plates
Fast Scanning and Volume Measurement
Scan down to 0.25 µm right on the production floor with Troika’s fastest 3D inspection device yet.
Measure anilox rolls, gravure cylinders and flexo plates in seconds to spot worn cells and damaged plates before they ruin a print run.
Streamlined Quality Control for Press Efficiency
Automated checks take the guesswork out of press setup and cut make-ready time.
Catch cell wear, plugging and plate faults early to prevent unplanned press stops and costly reprints.
Inventory Control with AI Assistant
Track every roll, plate and cylinder across all your sites in one central database.
The Troika Management System™ runs on your own intranet with a local AI assistant, helping you plan cleaning and re-engraving to cut ink waste and downtime.
Our Industry Partners
Why teams choose Troika
Precision 3D Inspection Devices
High-resolution image sensor
See it before it costs you.
A 2.3 MP widescreen sensor (1920×1200) and bright LEDs expose plugged cells, score lines and worn dots early, before they cause a bad run on press.
Quick-change lenses
Easy to switch. Built to last.
Switch magnification in seconds with magnetic lenses that measure from 40 to 600 lpcm (100 to 1500 lpi) and depths from 5 µm to 130 µm, preventing pressroom waste.
Two-touch setup
Simple to use. Always reliable.
A guided two-touch workflow with pre-set parameters removes operator guesswork, saving time during shift handovers and make-ready.
From roll to reading.
Auto-focus locks on
Set the Troika EVO™ on your roll, cylinder or plate.
Press 3D Scan to capture
The scan turns the surface into measurable 3D data in seconds.
See detailed results fast
Inspect depth and volume from any angle in 3D, catching faults before you ink up the press.
Rendered from a real Troika EVO scan.
Scan anilox rolls in seconds to measure cell volume, depth, wall thickness and screen count, with Complex Engravings included as standard. Flag wear, scoring and plugging early to cut ink waste and avoid press stops.
Full 3D Imaging
Complex Cell
Comparison Report
Monitor cylinder wear whether you engrave cylinders or print with them. Automated checks of volume, depth, walls and channels help you plan re-engraving and prevent defects on long runs.
Full 3D Imaging
Intaglio
Stylus Measurement
Measure dot shape, screen count, relief depth, angles and dot gain on everything from translucent to black elastomer plates. Prove every plate is press-ready to cut substrate waste and make-ready delays.
Full 3D Imaging
Reflective Plate Analysis
Elastomer and Letterpress Plate Analysis
Every scan, every site.
The Troika Management System™ stores every reading for your rolls, plates and cylinders in one database on your intranet, so you never lose press time hunting for in-tolerance assets.
Comparable everywhere. Private by design.
Every Troika EVO™ is calibrated in our lab to the same standard, so readings compare directly across all your sites.
TMS stays on your own intranet, keeping your data private while cutting out duplicate testing between sites.
An AI assistant that works locally.
Ask TMS a question in plain words and its local AI assistant answers from your records offline, with no subscription needed.
Filter by volume, screen, status and site to pull the right roll, plate or cylinder first time, cutting make-ready delays.
Included with every Troika EVO™, licensed for life.
With Annual Maintenance Packages
Upgrade smart. Save more.
Trade in your old AniCAM, even if damaged, for a Troika EVO™ with lifetime software, a three-year warranty, drop cover and training to cut pressroom waste from day one.
Software and support. Covered.
Includes all software updates, unlimited expert help, refresher training, diagnostic utilities and settings backup to prevent QC downtime.
